- Answer (#1) I just want to Monitor Water Parameters (display or datalog):
- Ability to Monitor: pH, ORP, Conductivity, Temperature, and/or TDS
- Hanna & Milwaukee product line of Continuous Monitoring Instruments
- For Monitoring, Datalogging and Alarming pH, ORP, or Temperature to a PC
you need to check out the Windows PC Dataloggers - Answer (#2) I just want to Control a single Water Parameter such as pH, ORP, Conductivity, or TDS:
- Ability to Monitor and Control: pH, ORP, Conductivity, and TDS
- You need to check out the Hanna and Milwaukee product line of Mini Controllers
- Answer (#3) I want a flexible user programmable controller with a Real Time Clock CONTROL of 1 to 4 120VAC System Components(Lights, Pumps, Alarms, etc...)
- Control: 120VAC System Components such as Lights, Pumps, Alarms, Valves and more...
- User Configurable: Using a PC you can easily re-configure the FlexTC as much as youwant
- Timers: 4 available Timers can be used for repeated cyclic events(ie: Wavemaker, Dosing...)
- Upgradable: Start with our software and then develop your own control code with Visual Basic and our Active-X Control
- Programmable: User programmable Loops(ie: Dosing pumps..), Cycles(ie: Wavemaker pumps..) and Timing(ie: Turn Light On at 6AM and OFF at 6pm)
- Expandable: NEW Active-X Control allows you to write your own Windows PC Software for even more flexability!
- X10 and A/D: with a PC in Control you can send X10 commands and also read the 4 A/D Inputs!
- Runs on its own: a real stand-alone controller - connect the PC only when I need to configure it
- Monitor: Input switches such as Level, Flow, Motion, Temperature, Vibration and more...
- Respond: to Input Signals, Timed Events and the on-board Real Time Clock
- Alarm: Remote Alarming via a Modem and Local Alarming with audible and visual indications
- You need the FlexTC ( A Windows PC User Configurable Timer Controller)
- Answer (#4) I want a stand-alone Controller that runs all on its own. This controller should be able to;
- Control: any 120VAC System Components such as Lights, Pumps, Alarms, Valves and more...
- Monitor: Input switches such as Level, Flow, Motion, Temperature, Vibration and more...
- Respond: to Input Signals, Timed Events and the on-board Real Time Clock
- User Configurable: Using a PC you can easily re-configure the FlexPLC as much as youwant
- Alarm: Remote Alarming via a Modem and Local Alarming with audible and visual indications
- Timers: 4 available Timers can be used for repeated cyclic events(ie: Wavemaker, Dosing...)
- Upgradable: Start with the 1 or 2 Input or Output sensors and add on as your needs arise
- Programmable: User programmable Loops(ie: Dosing..), Cycles(ie: Wavemaker..) and Responses(ie: Turn Fan On when Temp > 82F)
- Expandable: Now FlexPLC supports adding on the optional ICP DAS 7xxx RS-485 Modules for even more flexability!
- Ability to Run on its own: a real stand-alone controller - connect the PC only when I need to configure it
- You need the FlexPLC (a Stand Alone, User Configurable Controller)
- Answer (#5) I want to do it ALL - I want to be able to:
- Measure: pH, ORP, Conductivity, Temperature, Flow, Humidity, Pressure, Level and more..
- Datalog: Water Parameters and sensor data to your Hard Disk
- Control: Lighting, Water Level, CO2 Injection, Pumps, Fans, Chillers, Heaters and more...
- Monitor: Flood Sensors, Motion Sensors, Vibration Sensors, Power Out Sensors and more..
- Alarms: Remote Alarming via a Modem and Local Alarming with both audible and visual indications
- Timers: Multiple Timers(13 channels per module, 256 modules max.) can be added as needed for timed events(ie: Lighting control...)
- Data Analysis: Using MS Excel you can import your data and do graphical trend analysis to see just where your water parameters are going
- Networkable: Multidrop RS-485 Interconnection permits up to 4000 feet of interconnect cabling and 256 RS-485 modules.
- Upgradable: Start with the basics and add on as your needs arise
- Programmable: User programmable Loops(ie: Dosing..), Cycles(ie: Wavemaker..) and Responses(ie: Turn Fan On when Temp > 82F)
- Expandable: Up to 256 RS-485 Modules can be added to your network, thats up to 3,328 control signals and sensors in any combination !!
- You need the Aquatic Monitoring and Control System (AMACS)
Turn multiple 120VAC System Components ON and OFF (Lights, Pumps, Alarms, etc...)
have the ability to Respond to multiple INPUT Sensors(Level, Flow, Temperature, etc.....)
and be User configurable for my very own settings of Clock, Timer or Input responses
just the way I like it:
