Automated Aquarium Systems

Mini-Size Paddle Flow Switch


FL-V10 Flow Switch



DESCRIPTION:

The FL-V10 Flow Switch is designed for the flow/no-flow monitoring of your systems water pumps. Use in your own system or use with our Windows PC Controlled Aquatic Monitoring and Control System or our Stand Alone User Programmable FlexPLC System Compact and low cost Model V10 is perfect for flow control in smaller pipe sizes at higher system pressures. Unique patented switch adjustment enables quick changes between N.O. and N.C. - just loosen two screws and slide the reed switch to your choice of switch actions. Tighten screws and it's complete in seconds! Solid metal bodies enable operation at high system pressures of 1000 psig for brass units (69 bar) or 2000 psig for stainless steel (138 bar). Vane is specially formed for maximum strength; has removable laminated trim template showing where to cut for water or air flows in six pipe sizes from 1/2" to 2". Index arrow on side of body indicates correct flow direction. A table with the approximate actuation and deactivation flow rates is provided below.

Some of the V10's outstanding features include:


SPECIFICATIONS:

  SPECIFICATION   FL-V10/V10SS
  WETTED MATERIALS
  301, 302 and 316 stainless steel, ceramic 8 magnet, brass or optional 303 stainless steel body
  VANE MATERIAL
  301 stainless steel, 7/16" wide by .020" thick (11 x.51 mm)
  SWITCH BODY MATERIAL
  Choice of standard brass or optional 303 stainless steel.
  Reed Switch Housing: Polypropylene
  OPERATING PRESSURE   Brass, 1000 psig (69 bar); St.Steel, 2000 psig (138 bar) Maximum
  OPERATING TEMPERATURE   200°F (93°C) Maximum
  ACTUATION FLOW RATE   See Table
  SWITCH   Hermetically sealed Single Pole Single Throw (SPST) reed switch.
  Field adjustable between Normally Open(NO) and Normally Closed(NC)
  THREAD   1/2" NPT male
  MOUNTING ATTITUDE   Horizontal, Left or Right Flow.
  Install with index arrow pointing in direction of flow
  ELECTRICAL RATINGS   1.5 A @ 24 VDC resistive, 0.001 A @ 200 VDC resistive, 0.5 A @ 120 VAC.
  WIRE: 22AWG x 18"(460 mm) long
  DIMENSIONS/WEIGHT   Length: 5.25" (133 mm)
  Weight: 4.5 ounces (128 grams)


V10 Flow Rates




HOW TO ORDER:

FL-V10: Brass Lower Body Normally Open/Normally Closed Flow Switch..... $75.00

FL-V10SS: Stainless Steel Lower Body Normally Open/Normally Closed Flow Switch..... $90.00


How To Place your ORDER




[ HOME | PRODUCTS | HANNA | MILWAUKEE | RO / DI | LAMOTTE | LOVE CONTROLS | DATA ACQUISITION MODULES | MONITORING & CONTROL SYSTEMS | TECHNICAL INFO | SALES | SERVICE | CONTACT US ]