DATA SHEET:

Series THC

Digital Temperature / Humidity Switch Controller Three Digit Displays, 4 SPST 8amp Relays

SPECIFICATIONS Measurement Range: Temp -58 to 302°F (-50 to 150°C) and Humidity 0 to 100% RH. Ambient Operating Temp: 32 to 158°F (0 to 70°C). Resolution: ± 0.1° Accuracy: Temp ±0.5% of Range, RH ±3% of Range Input: Up to 2 Thermistors and 1 Humidity Sensor. Output: 4 SPST, 8 Amp @250VAC, 1/3 HP Relays. Control Type: ON/OFF Direction, Direct or Reverse Acting, Neutral. Power Input: 110VAC Probe Range: -58 to 302°F (-50 to 150°C). Display: Temp, 3-Digit Red and RH, 3-Digit Green with 1/2" High Digits. Weight: 1.17 Lbs (530g) Memory Backup: Non-Volatile Panel Cutout: 5.15" x 2.37" (131 x 111mm) Front Panel Protection: NEMA 4X (IP65)

The THC Series simultaneously Measures and Controls Temperature and Humidity. The unit features a Red 3-digit display for temperature indication and a Green 3-digit display for indicating humidity and a NEMA 4 (IP 56) enclosure. The Series THC is equipped with four independent relays, two for temperature control and two relays for humidity control.

The unit offers 61 programmable parameters for temperature and humidity control including set point, differential, direct/reverse acting, cycle time, alarm clock time, and decimal point adjustment. In the event of a probe error, the default operation of the relays can be set to open or close. The THC features error or alarm messaging and password protection.

The THC Temperature/Humidity Switch accepts up to two temperature probe inputs (sold separately) and a humidity sensor (sold separately) at least one each are required to be used with the Series THC.

AVAILABLE MODELS

Model Number	Description
THC-10	(110 VAC) Digital Temperature/Humidity Switch, Deg F
THC-11	(110 VAC) Digital Temperature/Humidity Switch, Deg C

HOW TO ORDER:

THC-10: Temperature/Humidity Switch, Deg F, 110VAC (probes not included, order below)...$160.00
THC-11: Temperature/Humidity Switch, Deg C, 110VAC (probes not included, order below)...$160.00

View the THC Dimesional Drawing

View or Download the THC Users Manual

ACCESSORIES/OPTIONS:

THC-P: Humidity Probe with 3V output and 4ft (1.2m) cable...$60.00
TS-5: Temperature Probe, PVC with 5ft (1.5m) cable...$25.00
AD-INLINE-05: 1/2" MNPT Threaded In-Line Adapter for Temperature Probe ...$15.00

THC-SYS-1: Installed and wired THC in a ABS chassis with 4 AC Outlet, 6ft power cord, switch & fuse ....$200.00

ORDERING EXAMPLES:

THC-10 + THC-P + TS-5: Controller with 1 temperature probe and 1 humidity probe...$240.00
Above + THC-SYS-1: Assembled and tested complete in ABSchassis w/ controller, 1 temperature probe, 1 humidity probe, ...$390.00