DESCRIPTION:

Pure Water Tester (PWT) enables you to check the purity of your distilled or demineralized water in laboratory or industrial environments. PWT is ideally suited for fields such as RO/DI Water purification, Printed Circuit Board washing, laundry, steam cleaning, checking car battery water and all areas where distilled, demineralized or pure water is used. PWT is housed in a completely redesigned and much more durable case which provides excellent protection against harsh industrial environments. The new casing also provides a much larger LCD and is easier to handle with a more ergonomic shape and calibration trimmer on the side. The range of the Pure Water Tester is 0.1 to 99.9 µS/cm, which gives a resistivity read-out as low as 10 Mohm.

• An Inexpensive Way to Measure the Purity of Water
• Low conductivity read-out on LCD display
• Check quality of your distilled or demineralized water
• Stick shape in a rugged housing
• Long battery life
• Maintenance-free use
• Ideal anywhere distilled and pure water are used

The table below shows a typical conversion of the PWT readings:

µS/cm	Reading Resistivity	mg/L of NaCl
99.9	10 Kohms	48
10	100 Kohms	4.3
1	1 Mohms	0.4
0.1	10 Mohms	0.04

HOW TO ORDER:

HI98308: PWT, Pure Water Tester with HI7033L cal solution.... $100.00

How To Place an Order by Phone, eMail, or Fax