DESCRIPTION:
The GRI2800 Water Sensor can prevent undetected water damage such as that caused by leaking pipes, aquariums or sumpswhich can cost homeowners thousands of dollars. These repairs and replacements are time consuming and costly to correct.AAS now introduces the GRI2800 Water Sensor. Using absolutely no moving parts, the Water Sensor is triggered by a moisture bridge across the sensorcontact. A Normally Open sensor for an Open Loop, the Water Sensor can beset to detect a layer of water as minute as 1/16 of an inch in depth. The Water Sensor can be combined with our FlexPLC or AMACS Systems. You can even use you own signalling device. This includes any existing alarm panel, wireless transmitter, battery powered or hard wired sounder available on your premises.With no moving parts to wear out, the GRI2800 Water Sensor will continue toprotect against troublesome and costly water leaks for years to come.
Some of the
GRI2800 Features include:
SPECIFICATIONS:
| SPECIFICATION | GRI2800 |
| SUPPLY VOLTAGE | 5 to 24 VDC |
| CONTACT | Normally Open(NO), 400mA Max |
| MULTIPLE SWITCHES | Wire in Parallel |
| CONNECTIONS | Use current limiting resistor >10VDC use 3000 ohm, 1/4W <10VDC use 400 ohm, 1/4W |
WHAT TO ORDER: