The FlexPLC System
(Users Manual, Instruction Manual, RS485 Interface, RS232 Cable, RS485 Cable, FlexPLC and Software)
Shown above with Standard Cabinet, all systems are now available with our
Clear Door wall mountable Cabinet

Solid hinged door (Clear Door optional) a lockable clasp made of durable, corrosion proof grey ABS plastic .

Behind the cover is the FlexPLC PCB, Fuses, Power Switch and Power Supply

Left Side shows the Hinges, RS485 Connector and 4 RCA Input Jacks, Right Side shows the Lockable Clasp and 4 120VAC Outlets

DESCRIPTION:

The FlexPLC System is a flexible, user configurable, low cost System Controller. FlexPLC means Flexible Programmable Logic Controller. FlexPLC is a powerful 4-Output, 4-Input Stand-Alone Controller that users with absolutely no programming experience can easily configure their own custom control sequences. Anyone with an application to control and logical thinking can easily configure FlexPLC to meet their own individual control and automation needs. You don't need to have any programming or systems experience to setup, configure and run FlexPLC. Using the Windows Configuration Utiltiy Software anyone can easily create applications to control lighting, water changes, Water level, chemical dosing pumps, powerheads, heaters, chillers, CO2 solenoids, Alarming, Motion Sensing, and much much more... you can now let your automation dreams become reality with FlexPLC.

FlexPLC comes with a Windows 95/98/XP Configuration Utility Software Package which takes all the hard work and years of programming experience typically required to use and implement a PLC away from the user. All the dirty work is now transparent to the user's of FlexPLC.

Pictured above is everything you receive when your purchase a FlexPLC System. You get everything you need in order to start controlling your aquatic system within an hour of unpacking the hardware and reading the FlexPLC Users Manual.

Here's what you get when you purchase a FlexPLC System:

1. Standard FlexPLC wall mountable cabinet shown above or our Optional Heavy Duty Cabinet with Solid hinged door(Clear Door optional), a lockable clasp, and a moisture/heat vent. The chassis is made of durable corrosion proof grey ABS plastic.



2. The FlexPLC Controller which comes equipped with the following;
   
   
   • a 8 bit PIC Microcontroller with an on board A/D converter
   • 16kbyte non-volatile EEPROM for program storage
   • Real Time Clock with Battery Back-up
   • RS485 Serial Interface Port
   • X-10 Interface Port
   • Air Temperature Sensor Interface Port
   • 4 Sensor Input channels
   • 4 Relay controlled and Fused 5Amp 120VAC Output Channels
   • 4 Timers for repetative ON/OFF Timing Sequences
   • 12VDC Power Adapter
   • 8 foot 15Amp Power Cord
   
   
   
3. RS232 to RS485 Serial Interface Module
   
   
4. 6 foot, RS232 Serial I/O Cable (optional lengths to 25 ft)
   
   
5. 20 foot, RS485 Serial I/O Cable (optional lengths to 4000 ft)
   
   
6. 4 pair of Input Signal Connectors
   
   
7. Windows '95/98/XP Configuration Utility Software
   
   
8. FlexPLC Users Manual
   
   

All the above for the price of just...$395.00

With FlexPLC you can control practically anything on your Aquatic System. You can Automate Water Level top off, Chemical Dosing, Lighting Control, Water Changes, Reverse Osmosis Systems, Powerhead Cycling, Alarming and much more... You can Monitor, Alarm, and Respond to many sensor inputs such as Water Flow, Water Level, Motion Sensors, Flood Sensors, Magnetic Door Sensors and much more.. You can use our available Remote Voice Dialer/Pager option to call or page you in the event of any or all of the 4 Inputs you select gets triggered, the possibilities are really endless.

To Learn more about the FlexPLC Hardware just continue on the tour...

[1 of 5]

<- Back Top Next ->