Automated Aquarium Systems

Single Dosing Pump System

(Use a 115VAC Digital Timer or any Standard Sprinkler Timer to control your dosing)


Dosing Pump Systems
The AAS DP1-DT is Shown Above
Bottom View


These Dosing Pump Systems Include:




DESCRIPTION:

The Single Dosing Pump Systems are simple-to-operate, ready-to-run, pre-wired and tested dosing pumps that can periodically dose your chemical for durations of 1min to 23hrs-59min in 1 minute increments and do so up to 14 times per day. (Note: This may be limited by your timer or sprinkler controller) These systems are great for Salt water aquariusts or hydroponics enthiusiast whom need to periodically dose a known amount of one or more chemicals. Just select a dosing pump with the flow rate desired and program your timer or sprinkler controller for a known time period and you'll have an automated chemical dosing system that adds a precise amount of chemical to your system. For example, if you selected a dosing pump with a flow rate of 12mL/min and you set the controller to dose every other day at 8:00AM for 3 minutes then that would equate to 36mL of your chemical being added to your system every 48 hours.

FULLY ASSEMBLED & TESTED:
AAS fully assembles and tests these Dosing Pump Systems. You don't have to concern yourself with the mounting, wiring and interconnections of the dosing pumps, relays, AC power, or testing of your dosing system. The optional digital timer we offer is our DT-17C and the optional controller we offer is our WM57161

WALL MOUNTABLE:
Housed in an ABS water resistant chassis that measures 4"L x 4"W x 4"D which comes with two mounting tabs for wall mounting or securing to a table. The dosing pump of your choice is pre-wired and fuse protected. The system is supplied with a 5ft 115VAC power cord for direct connection to any 115VAC Timer or is also provided with a pre-wired Power Relay and a standard RCA Jack for easy connection to any standard timer.

EASY TO USE AND CONTROL:
User programmable timing cycles, durations and the real time clock are displayed in large digits on our optional digital timer or controller. The Sprinkler Controller Interface Optional Unit comes with a 10A relay which is activated by any standard 24VAC Sprinkler Controller output. The Dosing Pump System is easy to use and to install. These Dosing Pump Systems are available in many flow rates to best suit your application. Some of the Dosing Pump System features include:



HOW TO ORDER:

DP1-DT: Single Periodic Dosing Pump System, 115VAC..... $125.00

DP1-ST: Single Periodic Dosing Pump System, 24VAC Sprinkler Timer Interface..... $200.00

ACCESSORIES/OPTIONS:

TBG023-001A: Norprene Tubing, 1/32" ID, 10 feet .... $20.00
TBG023-003: Norprene Tubing, 1/16" ID, 10 feet .... $15.00
TBG023-007: Norprene Tubing, 1/8" ID, 10 feet .... $15.00

Dosing Pumps - Choose your own Pump!
DT-17C: 115VAC Digital Timer.... $40.00


How To Place your ORDER




[ HOME | PRODUCTS | HANNA | MILWAUKEE | TECHNICAL INFO | SALES | SERVICE | ABOUT US | CONTACT US ]