DESCRIPTION:
The DN-SSR4 Relay Modules is a DIN Rail mountable bank of 4 Solid State Relays (SSR)
capable of switching 120 or 240VAC up to 4 Ampere loads. These modules can be turned
ON and OFF with the 7042: 13-Channel Output Control Module. The units have
a Status LED to visually show ON/OFF status. The units can be installed locally in your
DP7000 Distribution Panel. These relays work well as
a part of our RS-485 Aquatic Monitoring and Control System .
The DN-SSR4 includes 4 normally open, Form A , solid-state relays.
The user can use the DN-SSR4 to switch high voltage load, up to 240VAC and up to 4A.
Four enunicator LEDs, one for each relay, illuminate when their associated relay is activated.
Each output is equipped with a varistor that shunts the surge voltage of an
inductive load or electromagnetic brake to protect the relay contact point.
All relay controls and outputs are accessible through the wiring terminals.
Some of the DN-SSR4 Features are:
SPECIFICATIONS:
| SPECIFICATION | "DN-SSR4" |
| LOAD VOLTAGE | 50 to 250 VAC |
| LOAD CURRENT | 4 Amps Max. |
| SURGE CURRENT | 50 Amps Max. |
| CONTROL LOGIC | +24VDC @ 100mA max |
| OFF LEAKAGE CURRENT | 50 mA max |
| TURN ON TIME | 1 mS (Zero Cross) |
| ISOLATION VOLTAGE | 2500 V |
| OPERATING TEMPERATURE | 0 to 60 °C |
| DIMENSIONS | 77mm(L) x 101mm(W) x 66mm(H) |
WHAT TO ORDER:
DN-SSR4:DIN Rail 4-Channel Solid State Relay Module.... $Call
COMPLIMENTARY PRODUCTS:
The AAS RS-485 Aquatic Monitoring and Control System - How Does it Work?
I like what I see - What do I need to get started?
I still have some questions - AAS RS-485 Aquatic Monitoring and Control System FAQs
Check out the - AAS On-Line Literature Page