Click on the Image to get a more detailed picture of a typical
Windows PC Aquatic Monitoring and Control System

Every RS-485 Aquatic Monitoring and Control System requires these basic items;

1. A Dedicated Windows PC (User supplied) - click here to review the minimum PC system requirements
2. SW-TOOLPAK: Windows Software and Hardware AMACS ToolPak CD
3. DP-7000: Distribution Panel
4. FA-24PS: 24VDC, 2A Power Supply Module
5. 7520: RS232 to RS485 Converter Module
   • PA-12VDC: 120VAC to 12VDC, Power Adapter
   • CBL-232: Serial Interface Cable, DB9M-DB9F, 6 ft.
   • CBL-485: RS-485 Serial Interface Cable

Average price for a complete AMACS system that monitors 2 water parameters, 2 level switches, 1 flow switch, controls 1-4 lights, datalogs and alarms; as low as... $2500.00

System Add-Ons;

1. Control:
   • LIGHTS,
     
   • PUMPS (ie; Wavemaker, Water changes etc...),
     
   • VALVES (ie; Water Level Control etc...),
     
   • SOLENOIDS (ie; CO2 Injection etc...),
     
   • almost any 120VAC Component

2. Monitor WATER LEVEL
3. Monitor FLOW / NO-FLOW
4. Monitor FLOW RATE
5. Monitor TEMPERATURE
6. Monitor PH
7. Monitor CONDUCTIVITY
8. Monitor ORP
9. Monitor TEMPERATURE and PH
10. Monitor PH and CONDUCTIVITY
11. Monitor TEMPERATURE and PH and CONDUCTIVITY
12. Monitor TEMPERATURE and PH and ORP
13. Monitor TEMPERATURE and PH and CONDUCTIVITY and ORP
14. Monitor PRESSURE
15. Monitor HUMIDITY
16. Control HUMIDITY with a "HUMIDIFIER"
17. Monitor a FLOOD SENSOR
18. Local ALARM Options:
    • 2-TONE SIREN
      
    • PIEZO ELECTRIC BUZZER
      
    • STROBE LIGHTS
      
    
    
19. Remote ALARM Options:
    • 2-Channel Automatic Voice Dialer/Pager with Microphone
      
    • 2-Channel Automatic Voice Dialer with Microphone