DESCRIPTION:

The 7437 should be used when your PC does not have a modem or you do not wish to use your PC's modem for Automatic remote reporting of your AMACS System conditions. This automatic voice dialer is a stand-alone verbal reporting system for any NO or NC sensors or it can be used in combination with your AMACS System. When the inputs are triggered, the voice dialer calls up to 4 numbers and plays a user recorded message of up to 20 seconds. Pagers can also be called and custom reporting codes of up to 20 digits can be sent to the pager. Two seperate triggered channels each have their own message and phone/pager list. 1-16 dialing attempts, 1-255 message repeats - both user configurable. A built in microphone allows call recipients to listen in if you wish. The trigger inputs can be routed from your AMACS DP7000 Distribution Panel that houses any 7xxx module which has an available digital output channel(s). The AMACS Software can then be configured by the User to initiate a call when any user defined value is exceeded by any sensor inputs monitored by your AMACS System.

Some of the 7437's features include:

• Dials 4 numbers, 2 phone numbers and 1 pager, or 2 pagers
• 20 second message length
• Built-in microphone for listen-in capability
• NO or NC input trigger
• Up to 20 digit phone numbers and 20 pager digits
• Each channel has its own recording and phone/pager list

WHAT TO ORDER:

7437: 2-Channel Automatic Voice Dialer with Microphone....$175.00