DESCRIPTION:
The 7080 2-Channel Counter/Timer Module can directly count the output signals from
our FL-E33110-30 Flow Rate Sensor. If you just wish to have a "Flow" or "No-Flow" status indication
then check out the FL-PPS3201 Flow Switch. This unit can work with any pulse output Flow Rate Sensor that
works within the frequency and voltage input range of the 7080 as specified below. The 7080 can also be used as an event counter
for other various measurement purposes. The 7080 is
configured thru the AMACS Windows Software by the user. This module is capable of being
installed in your RS-485 Aquatic Monitoring and Control System .
Some of the 7080's features include:
SPECIFICATIONS:
| SPECIFICATION | 7080 |
| CHANNELS | 2 Independent |
| COUNTER DEPTH | 32 bits |
| INPUT FREQUENCY | 50 kHz maximum |
| INPUT MODE | Isolated or Non-isolated |
| ISOLATION INPUT LEVELS | Logic level 0: +1V maximum Logic level 1: +3.5 to 30V |
| ISOLATION VOLTAGE | 5000 Vrms |
| NON-ISOLATED INPUTS | Programmable Threshold Voltage Input Levels: Logic level 0: from 0 to +5V Logic level 1: from 0 to +5V Input pulse width: 10us minimum Programmable digital noise filter: 8 us to 262 ms |
| FREQUENCY MEASUREMENT | Range: 5Hz to 50Hz Programmable built-in gate time: 1.0/0.1sec |
| DIGITAL INPUT | Channels: 1 Logic level 0: 0 to +1V Logic level 1: 3.5V to +30V |
| DIGITAL OUTPUT | Channels: 2 Open collector to 30V, 30mA load max |
| POWER | 2W max from 10 to 30 VDC |
| DIMENSIONS | 86 x 26.5 x 26.5mm (3.4 x 1 x 1") |
WHAT TO ORDER:
7080: 2-Channel Counter/Timer Module..... $175.00
COMPLIMENTARY PRODUCTS: