DESCRIPTION:
The FL-33110-30 Flow Rate Sensor is designed for measuring the flow rate of your systems
main filter pump by the Aquarium Monitoring and Control System. The flow sensor uses a rotating turbine and a
magnetic Hall-Effect sensor to generate an electronic pulse proportional to the flow rate. The CPU
Controller converts these pulses into flow units. The sensor is made of Polypropylene and can be
mounted in any position. For best results, install the sensor after a straight run of inlet line no less
than 6" in length. The sensor is supplied with 12 feet of cable with stripped ends. This sensor requires
the FA-24PS 24VDC Power Supply (or equivalent) and the 7080 2-Channel Counter Module
to work properly in your Aquarium Monitoring and Control System Solution..
SPECIFICATIONS:
| SPECIFICATION | FL-33110-30 | |
| MATERIALS Housing: Other Wetted Parts: |
Polypropylene acrylic, tungsten carbide, ruby, sapphire |
|
| CONNECTIONS | 1" NPT(F) | |
| OUTPUT | 6 to 24 VDC Pulse (depends on supply voltage) | |
| OPERATING PRESSURE | 150 PSI maximum | |
| OPERATING TEMPERATURE | 71°C (160°F) Maximum | |
| FLOW RATE | 0.5 to 40.0 GPM | |
| ACCURACY | ± 1% F.S. | |
| LINEARITY | ± 1% F.S. | |
| REPEATABILITY | ± 0.5% F.S. | |
| POWER REQUIRMENTS | 6 to 24 VDC | |
| DIMENSIONS | 103 x 56 x 53mm (4.125 x 2.250 x 2.125") | |
| WEIGHT | 1.4 kg (3 lbs) |
HOW TO ORDER:
FL-33110-30: Impeller Type, Hall-Effect Flow Rate Sensor..... $400.00